
UNPACKING
PAGE
|
24
component in a laser processing system and as such does not comply with 21 CFR, Subchapter J or EN
60825-1 without additional safeguards.
Nomenclature
Firestar lasers are divided into two distinct functional categories: Keyswitch and OEM models. OEM
lasers, like the OEM v30, do not incorporate keyswitch or shutter functions required by CDRH and EN
60825-1 regulations because they are designed as components for integration into larger processing
systems by the Original Equipment Manufacturer (OEM) or System Integrator who bears full
responsibility for meeting the appropriate laser safety requirements for systems incorporating Class 4
lasers.
Model numbers
The last three characters in the Firestar model number serve to designate the functional category,
cooling method, and model version. The functional category is indicated by either a “K” for Keyswitch or
“S” (Switch-less) for OEM models. The next letter indicates the cooling method: “W” for water-cooled
units, “F” for fan-cooled units, and “A” for air-cooled lasers (where the customer must provide the proper
cooling via fans or blowers). The last letter in the model number indicates the current model version
beginning with “B.” For example, the model number FSV30SAG designates the Firestar v30 laser as an
OEM, air-cooled, “G” version unit.
Unpacking
The Unpacking section includes subsections:
•
Incoming inspection
•
Packaging guidelines
Incoming inspection
Upon arrival, inspect all shipping containers for signs of damage. If you discover shipping damage,
document the damage (photographically if possible), then immediately notify the shipping carrier and
NOVANTA. The shipping carrier is responsible for any damage occurring during transportation from
NOVANTA, Inc. to your receiving dock.
Packaging guidelines
•
To prevent equipment damage or loss of small components, use care when removing packaging
materials.
•
Save all shipping containers and packaging materials, including covers and plugs. Use these
specialized packing materials when shipping the laser to another location.
•
After unpacking, review the Inventory section and verify that all components are on hand.
Содержание v30
