Novanta Precession Elephant 2, Руководство пользователя

Страница: 51 / 103

PRECESSION ELEPHANT 2 Scan Head 2 Instruction Manual 2021-09-22
Procedure
1. Parametrize the laser for processing the work piece with minimal effect,
i.e. with average power and pulse repetition rate as low as possible.
2. Insert the work piece.
3. In the InScript software, load file
SearchOffset.jobx from the
Jobs\PrecessionElephant 1.3 and 2.0 folder of the
InScript Installation
.
4.
NOTICE
Laser beam of high power
could cause damage to the nozzle.
a.
Set the laser’s pulse repetition rate to 10
kHz.
b.
Set the laser’s average output power as low as possible
for processing the
work piece with minimal effect.
c. In the InScript software, in the
Navigator
view, click
Pens

default

linepar .
d. In the
Node Properties
view on the
Common
tab, set
Processing speed
to
20 mm/s .
CAUTION
Visible or invisible laser radiation
could cause damage to eye or skin.
•
Avoid eye or skin exposure to direct or scattered radiation.
Start the Job.
The Job draws a square on the work piece. The laser beam is clipped by
the nozzle’s aperture and thus
the square is cropped at its corners.
The square has to be centered to the nozzle’s aperture, i.e. the square’s
corners have to be symmetrically cropped.
51