Nortel HMS400, Руководство по обслуживанию

Страница: 146 / 158

April
2006
1. Insert the BIOS update disk (NTRH8057) into the floppy disk drive
2. Power down the server.
3. Remove the server cover and access the motherboard.
4. Move the Boot jumper (J1H1) to pins 10 and 11.
5.
To determine the jumper location, see “Jumper locations and settings” on page 145
Note: The jumper connects pins 9 and 10 by default for normal BIOS.
6. Power up the server.
Result: The server boots from the floppy disk and the BIOS update begins automatically. A
single high-pitched beep tone announces the start of the recovery process.
7. Wait until the BIOS update is finished.
A successful update ends with two high-pitched beep tones.
A failed update is indicated by a long series of short beep tones. This indicates that some of the BIOS
files may be corrupted. Three beeps indicates that the BIOS update disk is not inserted in the floppy
disk drive or is not bootable.
8. When the BIOS update is finished, the server will restart automatically.
9. While the server is restarting, remove the BIOS update disk from the server’s floppy disk drive.
10. While the BIOS boot initialization screen is displayed, power down the server.
11. Move the Boot jumper (J1H1) back to pins 9 and 10.
12. Power up the server.
13. Verify that the BIOS version was updated.
Jumper locations and settings
Nortel Hospitality Messaging Server 400 -146-
Maintenance Guide