Nortel HMS400, Руководство по обслуживанию

Страница: 141 / 158

April
2006
.
WARNING
Risk of system failure
You are not advised to change the factory settings for CMOS and
BIOS. In the event of corruption, to fix a discovered bug or to
support new hardware standards follow the procedures outlined in
this chapter.
Overview
The server’s BIOS defines the compatibility of the server with expansion hardware.
All systems configured by Nortel Networks manufacturing are shipped with at least the minimum
vintage BIOS. However, new BIOS may be issued to fix discovered bugs or to support new
hardware standards and options.
BIOS release
The following are tested and supported releases of BIOS and firmware for the server:
•
Intel BIOS release: P07_64 or later
•
firmware release: BMC1.05
If these releases are not being used on the HMS 400 server, they must be updated.
To determine the BIOS release
1. Start (or restart) the server.
2. Read the BIOS version on the display.
The BIOS version appears after the MAC address information.
You can also find the BIOS version in the BIOS configuration sections in the server menu. See “To
configure the BIOS,” for instructions.
BIOS Settings
This section identifies the HMS 400 server’s BIOS settings:
•
Main
•
Advanced
•
Security
•
Server
•
Boot
See “To configure the BIOS,” for instructions on how to verify that the HMS 400 server settings are
set to the values given in the following sections.
Main
Options Settings
System Time Set for the current time.
System Date Set for the current date.
Floppy A: 1.44/1.25 Mbytes, 3.5 inch
Hard Disk Pre-Delay Disabled
Primary IDE Master CD-ROM
Primary IDE Slave None
Secondary IDE Master None
Nortel Hospitality Messaging Server 400 -141-
Maintenance Guide