System Messages
206901-A
B-7
Invalid tunnel remote system name.
A remote system name has not been provided or is invalid. Each
tunnel configuration requires a remote system name for
authentication.
IP Address is invalid.
The IP address entered as the router’s public or private address
was not valid.
Lower bound address is out of range
(231-254).
The IP address entered in the Dial In IP Address-Low field is not
valid. It must be a number in the range from 231 to 254, and at
least one lower than the upper bound IP address configured.
Local name is required.
The local name of a tunnel is not configured. It is a required
parameter.
Maximum number of tunnels
exceeded. No more are allowed.
The maximum number of tunnels has been exceeded. To
configure another, an existing tunnel configuration must be
deleted.
MAC Address was not specified.
The MAC address in the static DHCP entry configuration must be
from one to 12 hexadecimal digits (0-9, a-f).
Management session time out.
A Web browser management session has been idle for more than
the configured time out. The default timeout is 10 minutes.
The menu option you clicked on can’t
be found. Please try again.
An internal error has occurred. Try this operation again.
NAT fails to do translation. The protocol
of the packet isn’t supported.
A Network Address Translation operation failed because the
packet protocol type was unknown or is not supported.
NAT fails to do translation. NATT not
found for an outgoing ICMP error
message.
An attempt to perform a Network Address Translation operation on
an ICMP packet (for example, ping) has failed. The Network
Address Translation table entry could not be found.
NAT fails to get proxy entry. Null proxy
structure.
An internal error occurred. Please contact customer support.
The new password does not match the
confirmed password.
The confirmation password entered is not the same as the new
password entered during the password operation.
The new password is the same as the
old password.
The new password is the same as the old password.
Not a static route.
An attempt has been made to delete a non-static route in the IP
routing table. Only static routes can be deleted.
Only 8 rules allowed.
The maximum number of filtering rules, system-wide, has been
exceeded. To add an additional rule, one must be deleted.
Parameters Accepted/ Applied
parameter accepted.
All parameters entered were acceptable for use by the router.
Table B-1.
System Messages
(continued)
Message
Meaning
Содержание BayStack 820
