Nortel BayStack 820, Инструкция по установке и справочник

Страница: 185 / 258

Using the Command Line Interface
206901-A
10-35
IPX Commands
These commands configure IPX settings for the router.
Table 10-12 lists the IPX commands.
Table 10-12. IPX Commands
Command Page
add ipx route <destination_netnumber> <interface_name> <hop_count,
1-15> 10-36
add ipx route <destination_netnumber> lan <gateway_MACaddr>
<hop_count, 1-15> 10-36
+add ipx sap 10-37
delete ipx <interface_name> 10-38
delete ipx default route 10-38
delete ipx route <destination_netnumber> 10-38
delete ipx <interface_name> 10-38
disable spoofing <profile_name> [ipxrip | ipxwatchdog] 10-38
enable spoofing <profile_name> [ipxrip] 10-38
enable spoofing <profile_name> [ipxwatchdog] <1-60> 10-38
ipxping <remote_network_#> <remote_MACaddr> <repeat_count> 10-39
set ipx default route <interface_name> 10-39
set ipx default route lan <MACaddr> 10-39
set ipx rip <interface_name> {disabled | enabled} 10-39
set ipx <profile_name> 10-39
set ipx <profile_name> <network_#> 10-39
set ipx lan 10-40
set ipx lan <local_network_#> 10-40
set ipx lan <local_network_#> {802.2 | 802.3 | Ethernet_II/snap} 10-40
show ipx <interface_name> 10-40
show ipx routing table 10-41
show ipx sap table 10-41
show ipx statistics 10-43