Nordson VersaBlue VB Series, Руководство пользователя

Страница: 73 / 280

Operation
4-7
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
If the melter is to be operated via the interface Standard I/O , change the
motor enable from Control panel to Control panel AND standard I/O .
Refer to Control Panel − Overview − / M2.1
Standard I/O: Observe for edge-controlled signals (example)
If standby is switched on via the interface (rising edge), it can be switched
off with the seven-day clock or by the operator on the control panel
( Who-touched-me-last ).
If standby is then to be switched on again via the interface, it must first be
switched off (falling edge) then on again via the interface.
Key-to-line − settings
Refer to Control Panel − Overview − / M1 to M3
Select temperature unit, ° C (default) or ° F
Select pressure unit: bar (default), psi or kPa
Refer to
Control Panel − Overview − / V15
Set service interval.
The service tasks that are to be indicated as well as the intervals must
be stipulated. For recommended intervals refer to section Maintenance .
The intervals may need to be adapted to the operating conditions.
Refer to
Control Panel − Overview − / V16
Additional parameters, depending on model of melter.
For example: Optimize level evaluation (Refer to
Filling the Tank / Level)