LA 404 Pattern Control System
5
Part 1037527
B
!
200
5
Nordson Corporation
Manual 66-LA404-MA-01
Maintenance and Repair Practices
"
Perform scheduled maintenance activities at the intervals described in
this document.
"
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
"
De-energize the equipment and all auxiliary devices before servicing the
equipment.
"
Use only new factory-authorized refurbished or replacement parts.
"
Read and comply with the manufacturer’s instructions and the MSDS
supplied with equipment cleaning compounds.
NOTE:
MSDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson
representative.
"
Confirm the correct operation of all safety devices before placing the
equipment back into operation.
"
Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable MSDS or
contact the authority having jurisdiction for information.
"
Keep equipment safety warning labels clean. Replace worn or
damaged labels.
Equipment Safety Information
This equipment safety information is applicable to the following types of
Nordson equipment:
"
hot melt and cold adhesive application equipment and all related
accessories
"
pattern controllers, timers, detection and verification systems, and all
other optional process control devices
Equipment Shutdown
To safely complete many of the procedures described in this document, the
equipment must first be shut down. The level of shut down required varies
by the type of equipment in use and the procedure being completed.
If required, shut down instructions are specified at the start of the
procedure. The levels of shut down are:
Relieving System Hydraulic Pressure
Completely relieve system hydraulic pressure before breaking any hydraulic
connection or seal. Refer to the melter-specific product manual for
instructions on relieving system hydraulic pressure.
Содержание LA 404
Страница 28: ......
