LA 404 Pattern Control System
12
Part 1037527
B
!
200
5
Nordson Corporation
Manual 66-LA404-MA-01
System Features
"
Self configuration upon power up
"
LCD programming/setup menu screen
"
The operating system software in the pattern controller allows electronic
field software upgrades via the computer’s serial port
"
Capable of storing up to 50 programs
"
Can dynamically change program parameters during pattern controller
operation
"
Monitors fault and warning conditions
"
Guns dispense a maximum of four beads. Bead types include normal,
modulated, dot, stitch, random, and continuous
"
Four channels with up to two gun capacity per channel
"
Each channel has a corresponding driver capable of driving two guns
simultaneously
"
Automatically converts glue line patterns to other bead types
"
Digital display of machine speed, work rate, and total count
"
Programmable gun compensation
"
Internal timer function for fixed speed machines
"
Pressure run-up
"
Remote gun purge
"
Encoder scaling
"
Remote recipe program recall
"
Integrated tip sealer control
"
Programmable gun driver
Software Upgrade
The pattern controller’s software can be upgraded, and the user programs
can be saved or restored in the field by using the Nordson Configuration
Manager (NCM). The NCM is a Windows
#
-based application that allows
the pattern controller to communicate with a personal computer (PC). The
communication is enabled by a serial cable that is connected to the PC
COM port (selected during the software installation routine) and the serial
port connection (COM port) located on your pattern controller’s rear panel.
The NCM can be obtained from:
www.enordson.com/support
Содержание LA 404
Страница 28: ......
