13
INDUSTRY
3.5
General safety rules and regulations
Section 3
General information and safety regulations
Observance of the machinery directive and compliance
with the paragraphs relevant to the relative harmonised
standards have allowed use to eliminate or reduce the
risks connected to this machine/partly completed
machinery during its life stages.
The necessary warnings and safety measures have been
taken against residual risks, that is to say those risks that
could not be eliminated by design choices or by using
guards. For detailed information see the dedicated para-
graphs.
Failure to apply these requirements could render the
safety conditions foreseen in the design phase inade-
quate.
It is recommended to strictly follow the warnings and the
rules of conduct reported here.
Personnel in charge of the operation and manage-
ment of the BLAST CHILLER must be instructed by
their employer on the correct use and on the residu-
al risks posed by the machine, as well as on the
safety devices installed and on the general accident
prevention rules provided for by EU Directives
and/or the legislation in force in the country where
the machine is to be used. Personnel in charge of
the operation and management of the BLAST
CHILLER must have read these instructions in full.
Personnel responsible for using the blast chiller
must be in optimal mental and physical condition
and not be under the influence of substances which,
by their nature, can alter the sense of perception or
slow down their reflections.
It is absolutely forbidden for children and unsuitable
persons and/or those with limited mental abilities to
operate and manage the BLAST CHILLER; these
persons must also be kept at a safe distance from it.
La Nuovagel S.r.l. assumes no liability for damage to
property or persons deriving from the BLAST CHILLER
or for the physical safety of the operator or third parties
deriving from the non-observance of the safety rules
indicated in the technical documentation supplied with
the BLAST CHILLER itself. Before starting work, opera-
tors must be fully aware of the features of the BLAST
CHILLER, the position and operation of all the controls;
furthermore, they must have read and fully understood
this operation and maintenance manual.
The BLAST CHILLER must be used exclusively by
operators who have taken part in the on-site train-
ing given by staff from "La Nuovagel S.r.l." (if includ-
ed in the supply contract) and/or who have fully
understood the instructions contained in the corre-
sponding documents.
WARNING!
The instructions, warnings and general acci-
dent-prevention rules contained in the correspond-
ing documents or indicated on the signs attached to
the BLAST CHILLER must be respected in full.
WARNING!
Tampering or unauthorised replacement of one or
more parts of the BLAST CHILLER, the use of
accessories, tools, consumables other than those
recommended by the manufacturer may represent
a hazard to the safety of the operator and free the
manufacturer from civil and criminal liability.
WARNING!
Before using the machine, make sure that any
hazardous condition has been properly eliminated.
Before using the machine, make sure that all
guards or other protections are in place and that
all safety devices are present and effective.
After removing the packaging, make sure that
the machine is intact in all its parts, otherwise
contact your dealer.
Do not place solid or liquid objects on top of the
machine/partly completed machinery.
Before carrying out any cleaning or maintenance
on the machine/partly completed machine,
disconnect the equipment from the mains.
In the event of a fault or malfunction, always
switch off the equipment. In the event of machine
fault and/or malfunction, turn it off and refrain
from any attempt to repair or intervene directly.
Contact qualified personnel.
WARNING!
•
•
•
•
•
•
