7
INDUSTRY
In the event that the equipment is
immersed in liquids, due to natural or
other disasters, contact an authorised service
centre for repair before restarting the machine.
In the event of strange noise, smoke
or odours coming from the machine,
disconnect immediately and contact an author-
ised service centre.
Do not place the blast chiller on unsuita-
ble surfaces, for example on uneven or
sloping surfaces that have the potential to
become unsuitable and which could cause
instability of the machine or of the product con-
tained therein. The machine must be levelled so
that the condensate drain works properly other-
wise condensate may leak from the machine
door.
Before carrying out any type of routine
maintenance and cleaning operation,
disconnect the machine from the mains power
supply by operating the general switch/discon-
nector.
The core probe must be used solely for
the purpose for which it is designed, i.e.
to measure the temperature at the core of food
products that are being frozen or chilled.
Do not insert fingers, tools or objects
through the fan grilles, this could damage
the machine or eject parts resulting in cutting,
shearing and impact with persons in the imme-
diate vicinity of the blast chiller.
Do not pour water on live parts of the
machine, neither on the electric cable,
nor on plugs..
Do not clean the blast chiller with abra-
sive or aggressive detergents that could
damage and alter the surface properties of the
cabinet's steel.
Do not use the blast chiller outdoors.
Do not use accessories and parts that are
not original and not authorised by the
manufacturer.
Do not place the blast chiller near heat
sources or direct sunlight.
Under no circumstances should you
remove the protective grilles of the fans.
Section 1
Safety warnings
In case of prolonged machine inactivity,
disconnect it from the mains power supply.
If the power supply cable of the machine
is damaged, ensure that it is replaced with
an identical one by qualified personnel in order
to reduce or eliminate any resulting risks.
Do not pull the power cable of the machine
to disconnect it from the mains.
