Nord Drivesystems SK 180E Series, Руководство пользователя

Страница: 121 / 212

5 Parameter
BU 0180 en-4118 121
P416
Ramp time PI setpoint
(Ramp time PI setpoint value )
S P
0.00 ... 99.99 sec
{ 2.00 } This parameter is only effective when the function PI process controller is selected.
Ramp for PI setpoint
P417
[-01]
...
[-02]
Offset analogue output
(Offset analogue output)
S P
-10.0 ... 10.0 V
{ all 0.0 }
[-01] = First IOE,
AOUT of the first I/O extension (SK xU4-IOE)
[-02] = Second IOE,
AOUT of the second I/O extension (SK xU4-IOE)
only with
SK CU4-IOE or
SK TU4-IOE
In the analogue output function an offset can be entered to simplify the processing of the
analogue signal in other equipment.
If the analogue output has been programmed with a digital function, then the difference between
the switch-on point and the switch-off point can be set in this parameter (hysteresis).