Nord Drivesystems SK 180E Series, Руководство пользователя

Страница: 152 / 212

NORDAC BASE (SK 180E / SK 190E) – Users Manual for Frequency Inverters
152 BU 0180 en-4118
P709
[-01]
...
[-07]
Analog input voltage
(Voltage analogue input)
-100 ... 100 % Displays the measured analogue input value.
[-01] = Analogue input 1 , function of analogue input 1 integrated into the FI
[-02] = Analogue input 2 , function of analogue input 2 integrated into the FI
[-03] = Ext. analogue input 1, AIN 1 of the first I/O extension SK xU4-IOE
[-04] = Ext. analogue input 2, AIN2 of the first I/O extension SK xU4-IOE
[-05] = Ext. A.in. 1 2nd IOE, "External analogue input 1 2nd IOE“ , AIN1 of the second
I/O extension (SK xU4-IOE) (= Analogue input 3)
[-06] = Ext. A.in. 2 2nd IOE, "External analogue input 2 2nd IOE“ , AIN2 of the second I/O
extension (SK xU4-IOE) (= Analogue input 4)
[-07] = Setpoint module , SK SSX-3A, see BU0040
P710
[-01]
[-02]
Analogue output volt.
(Analogue output voltage)
0.0 ... 10.0 V Displays the delivered value of analogue output.
[-01] = First IOE, AOUT of the first I/O extension (SK xU4-IOE)
[-02] = Second IOE,
AOUT of the second I/O extension (SK xU4-IOE)
P711
State of relays
(state of digital outputs)
00000 ... 11111
(bin)
or
00 ... FF
(hex)
Indicates the actual status of the digital outputs of the frequency inverter.
Bit 0 = Digital output 1
Bit 1 = Digital output 2
Bit 2 = reserved
Bit 3 = reserved
Bit 4 = Digital output 1, IO extension 1
Bit 5 = Digital output 2, IO extension 1
Bit 6 = Digital output 1, IO extension 2
Bit 7 = Digital output 2, IO extension 2
Bits 7-4
Bits 3-0
Minimum value
0000
0
0000
0
Binary
hex
Maximum value
1111
F
1111
F
Binary
hex
SimpleBox: The binary bits are converted to a hexadecimal value and displayed.
ParameterBox: The bits are displayed increasing from right to left (binary).
P714
Operating time
(Operating time)
0.10 ... ___ h This parameter shows the time for which the FI was connected to the mains and was ready for
operation.
P715
Running time
(Enablement time)
0.00 ... ___ h This parameter shows the time for which the FI was enabled and supplied current to the output.