Nord Drivesystems SK 180E Series, Руководство пользователя

Страница: 158 / 212

NORDAC BASE (SK 180E / SK 190E) – Users Manual for Frequency Inverters
158 BU 0180 en-4118
P748 CANopen status
(CANopen status
(system bus status))
0000 ... FFFF
(hex)
or
0 ... 65535
(dec)
Shows the status of the system bus.
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Bit 4:
Bit 5:
Bit 6:
Bit 7:
Bit 8:
Bit 9:
Bit 10:
24V Bus supply voltage
CANbus in "Bus Warning" status
CANbus in "Bus Off" status
System bus
→ Bus module online (field bus module, e.g.: SK xU4-PBR)
System bus → Additional module 1 online (I/O - module, e.g.: SK xU4-IOE)
System bus → Additional module 2 online (I/O - module, e.g.: SK xU4-IOE)
The protocol of the CAN module is 0 = CAN / 1 = CANopen
Vacant
"Bootup Message" sent
CANopen NMT State
CANopen NMT State
CANopen NMT State Bit 10 Bit 9
Stopped
Pre- Operational
Operational
0
0
1
0
1
0
P749
Status of DIP switches
( Status of DIP switches)
0000 ... 0007
(hex)
or
0 ... 007
(dec)
This parameter shows the actual setting of the FI DIP switch "S2" (See BU0200)(please see
chapter 4.3.2.2 "DIP switches (S1, S2)").
Bit 0:
Bit 1:
Bit 2:
DIP switch 1
DIP switch 2
DIP switch 3
P750
Stat. overcurrent
(Overcurrent statistics)
S
0 ... 9999 Number of overcurrent messages during the operating period P714.
P751
Stat. Overvoltage
(Overvoltage statistics))
S
0 ... 9999 Number of overvoltage messages during the operating period P714.
P752
Stat. mains failure
(Mains failure statistics)
S
0 ... 9999 Number of mains faults during the operating period P714.
P753
Stat. overtemperature
(Overheating statistics)
S
0 ... 9999 Number of overtemperature faults during the operating period P714.