Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 61 / 84

Operation Box for Multi Spindle Screw Driving Machine 3. Setup function
25
3.3 Model setup function
This function is used to specify tightening conditions for a model according to the product subject to screw
tightening work.
Main functions

Model conditions can be specified. Up to 0 to 15 models (16 types) can be set.

With the standard machine, model settings are intended for driver channels only. However, optional
settings (4 free items of 1 to 4) are also available.
If you quit model setup without registering the model setting, it will not be rewritten. Be sure to press the
registration switch to complete registration. If you intend to view a setting without necessity of registration,
do not execute registration procedure.
To change the display to the MODEL SETUP screen, follow the procedure below:

SETUP screen
Touch the “MODEL CHANGE” switch on the SETUP screen as shown above, to change the display to the
MODEL SEATUP screen.

MODEL SETUP screen

Numeric keys

[DRIVER CH]
This item is used to set a driver channel. Touching the numerical display field (gray area)
on the above screen displays numeric keys.
Set a driver channel with the numeric keys. In this case, however, you should set a channel
for which a driver controller has been set in advance. If you set a channel without driver
controller setting, it may cause malfunction of the machine.

[FREE *]
Optional function. To incorporate a function specific to user’s machine, use this parameter.
To use this parameter, the CPU program must be changed. With the standard program,
setting of this parameter will not be reflected in machine operation.