Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 58 / 84

Operation Box for Multi Spindle Screw Driving Machine 2. Functions of the operation panel
22

MANUAL 3/4 screen
Each switch on this screen is optionally available in case where special equipment is provided for the
machine. No function has been assigned, as standard.

[RESET]
This switch/lamp is used to reset a fault of the machine. The buzzer and fault status can be
reset if the machine is in the condition that enables fault reset.
During a fault: Lit
When the machine has no fault: Unlit

[RET]
This switch is used to change the display to the MENU screen.

[

], [

]
These switches are used to change the display to other manual screens.

MANUAL 4/4 screen

[ORIGIN]
These switches/lamps are used for machine origin return operation. Pressing the “START”
switch starts machine origin return. When all units are returned to the origin, operation
ends. Origin return operation can be forcedly stopped by pressing the “STOP” switch.
During origin return operation: The “START” lamp is blinking. The “STOP” lamp is unlit.

[RESET]
This switch/lamp is used to reset a fault of the machine. The buzzer and fault status can be
reset in the condition where fault reset is enabled.
During a fault: Lit
When the machine has no fault: Unlit

[RET]
This switch is used to change the display to the MENU screen.

[

], [

]
These switches are used to change the display to other manual screens.