Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 60 / 84

Operation Box for Multi Spindle Screw Driving Machine 3. Setup function
24
3.2 Model change function
This function is used to change a model according to the product subject to screw tightening work.
Main function

Model setting can be changed. Up to 0 to 15 models (16 types) can be set.
Select a model that has been registered. The contents registered in “MODEL SETUP” will be reflected.
To change the display to the MODEL CHANGE screen, follow the procedure below:

SETUP screen
Touch the “MODEL CHANGE” switch on the SETUP screen as shown above, to change the display to the
MODEL CHANGE screen.

MODEL CHANGE screen

Numeric keys

[Model change procedure]
Touching the numerical display field “New model No.” (gray area) on the above screen
displays numeric keys. Select a model with the numeric keys. Note: You should select a
model that has been registered in model setup. If you select a model yet to be registered, it
may cause malfunction of the machine.