Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 59 / 84

Operation Box for Multi Spindle Screw Driving Machine 3. Setup function
23
3. Setup function
3.1 Outline of setup function
The setup function enables model change, model setup and machine parameter change/registration.
Main functions

Model change

Setting change by model

Machine setup change

Touch panel system change

Maintenance information check
As described above, the system can be customized according to user’s machine through registration of
machine structure settings and functional settings, and conditions specific to model. The system enables
condition setup for each model, so that it can cope with various models.
Also, optional setting items are prepared in model setup, enabling easy setup of additional functions.
* To add optional functions, software change is required.
This section describes manipulation and operation of each setting for our standard type multi spindle screw
driving machine.
To change the display to the SETUP screen, follow the procedure below:

MENU screen
Touch the “SETUP” switch on the MENU screen as shown above, to change the display to the SETUP
screen.

SETUP screen
Verification and registration of settings on this screen are under authentication level management by
password. To execute each operation, read “3.1.4 Authentication (password) function” in this manual in
advance. If you change the settings of “Machine setup”, the machine may not operate, or malfunction
occurs. Before operation of the SETUP screen, understand the contents of the manual thoroughly.