Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 50 / 84

Operation Box for Multi Spindle Screw Driving Machine 2. Functions of the operation panel
14
2.2 Automatic operation function
This function is used to execute automatic operations of the machine.
Main functions

Automatic operation start/stop

Counter setup and /view function

Detailed machine information (Model subject to work, driver (Dr) channel, screw shortage alarm, fault,
cycle time), etc.

Monitor function (Tightening result, I/O monitor), etc.
The system incorporates the above functions required for automatic operation.
This section describes manipulation and operation of each switch on the “AUTO” screen.
To execute automatic cycle operation, assume that all required settings for automatic operation are
completed, and that the machine is at the origin.
To change the display to the AUTO screen, follow the procedure below:

MENU screen
Touch the “AUTO” switch on the MENU screen as shown above, to change the display to the AUTO
screen.

AUTO screen

[ORIGIN]
This lamp indicates that the machine is at the origin.
When the machine is at the origin: Lit
When the machine is not at the origin: Unlit

[AUTO RUN]
This switch/lamp is used to start automatic operation of the machine.
Pressing [AUTO RUN] starts screw tightening operation according to the model settings.
During automatic operation: Lit
When the machine is not in automatic operation: Unlit