Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 47 / 84

Operation Box for Multi Spindle Screw Driving Machine 2. Functions of the operation panel
11
2. Functions of the operation panel
2.1 Outline of functions
The operation box for the multi spindle screw driving machine uses a programmable display unit
(HG1F-SB22YF-S: IDEC) for the operation panel, which incorporates dedicated software for fastening tool
control screens. The operation box provides both operation panel functions and various setting functions,
which is intended for easy operation of screw-fastening tools.
1) Operation panel functions required for automatic operation and manual operation are provided.
2) Various timer and counter setup and change functions are provided.
3) Fault view function, fault record view functions and fault reset function are provided.
Through development of the dedicated software, the operation panel enables easy operation of the above
functions.
2.1.1 Emergency stop function
Emergency stop function is used for Master-OFF and emergency stop operations.
[Main functions]

Master OFF operation and emergency stop operation using the hardware switches and emergency stop
status are indicated on the operation panel screen.
If you press the emergency stop switch (red switch) at the upper left of the operation pendant when the
master switch is ON, the machine is brought into emergency stop status. To turn OFF the master switch, or
if a hazardous condition occurs during machine operation, conduct this operation.
2.1.2 Emergency stop reset function
This function is used to reset emergency stop status.
[Main function]

Emergency stop reset operation using the hardware switch and emergency stop reset status are indicated
on the operation panel screen.
The emergency stop switch (red switch) at the upper left of the operation pendant provides “push-lock &
turn-reset” functions. To reset emergency stop status, turn the emergency stop switch clockwise.
POINT: If the machine remains in emergency stop status even after the emergency stop switch on the
operation panel is reset, check the “external emergency stop switch.”