Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 51 / 84

Operation Box for Multi Spindle Screw Driving Machine 2. Functions of the operation panel
15

[CYCLE STOP]
This switch/lamp is used to stop automatic operation of the machine. During cycle stop, the
lamp is lit. At the time when one cycle operation is completed, automatic operation stops,
and the cycle stop lamp turns off.
During cycle stop status: Lit
When the machine is not in cycle stop status: Unlit

[FAULT]
This lamp indicates fault status when a fault occurs with the machine.
During immediate stop fault: Lit
During cycle stop fault: Blinking
When the machine has no fault: Unlit

[RESET]
This switch/lamp is used to reset a fault of the machine. The buzzer and fault status can be
reset if the machine is in the condition that enables fault reset.
During a fault: Lit
When the machine has no fault: Unlit

[RET]
This switch is used to change the display to the MENU screen. You can go to the MENU
screen even when the machine is under automatic cycle operation. In this case, however,
switches other than “AUTO” are disabled. At completion of the current cycle, each switch
becomes active, and you can change the screen.

[DRch]
This item indicates a channel number of the currently selected driver. A channel No. that
has been registered in model setup is displayed.

[TIME]
A cycle time of the previous cycle is displayed. During operation, elapse time is displayed.

[Counter display]
A current count value of each counter is displayed.
GOAL: Counts a number of all completed products.
NG: Counts a number of products judged to be NG among completed products.
OK: Counts a number of products judged to be OK among completed products.

[INF.]
This switch is used to change the display to the INFORMATION screen.
Contents of the INFORMATION screen are as follows: