Nitto Seiko FEEDMAT FM5000 Series, Инструкция по эксплуатации

Страница: 54 / 84

Operation Box for Multi Spindle Screw Driving Machine 2. Functions of the operation panel
18

INFORMATION 3/6 screen

Numeric keys
This screen is used to view and change each counter’s preset value. Touching the numerical display field
for each counter displays numeric keys. Set a value, and press “ENT” to register the setting.
* When each counter’s count reaches the preset value, the system outputs “Count-up stop” signal for each
counter. This condition is handled as cycle stop fault. When the preset value is “999999”, the counter
does not work.

[RESULT]
This switch is used to change the display to the INFORMATION 1/6 screen (result record screen).

[RET]
This switch is used to change the display to the AUTO screen.

[

]
This switch is used to change the display to the INFORMATION 2/6 screen (monitor screen).

[

]
This switch is used to change the display to the INFORMATION 4/6 screen (I/O monitor screen).

INFORMATION 4/6 screen
This screen is used to check PLC input/output status.

[RESULT]
This switch is used to change the display to the INFORMATION 1/6 screen (result record
screen).

[RET]
This switch is used to change the display to the AUTO screen.

[

]
This switch is used to change the display to the INFORMATION 3/6 screen (monitor
screen).

[

]
This switch is used to change the display to the INFORMATION 5/6 screen (I/O monitor
screen).