52
•
Contents
Installation and Maintenance Manual Nimbra 300 Series
©2006 Net Insight AB, All rights reserved
Figure 28. Opening the module locks
3.
Retract the module straight out, see Figure 29. Place the module in an ESD
protective package immediately.
Figure 29. Retracting the module
Connecting a Network Interface Module
1.
Make sure you are properly grounded before proceeding (anti-static bracelet,
anti-static shoes or other means)
2.
Grab the module by the handles and insert the module in the guides of the
switch chassis, see Figure 30. Make sure to keep the module vertical, otherwise
the module might stick at the upper or lower end of the module.
Figure 30. Inserting the module
3.
When the module is fully inserted, push the locks inward, according to Figure
31, and tighten the screws to lock the module to the chassis.
Figure 31. Locking the module in place
