Control System
39
Service Manual – Condor
™
EcoFlex
™
, BR 1100/1300 EcoFlex
™
•
Vacuum/Wand Switch
– This switch controls the squeegee lift actuator and vacuum
motor(s) as follows:
–
Pressing the switch the first time will switch on vacuum motor(s) and switch on
the actuator to lower the squeegee. The vacuum/wand indicator will light as the
actuator is running. Once the squeegee reaches the down position, the vacuum/
wand indicator will blink.
– Pressing the switch a second time will switch off the vacuum/wand indicator
– Pressing the switch a third time will switch off the vacuum motor(s) and switch on the actuator
to raise the squeegee. The vacuum/wand indicator will light as the actuator is running. Once the
squeegee reaches the up position, the vacuum/wand indicator will blink.
– Pressing the switch a fourth time will switch off the vacuum/wand indicator
•
Side Broom On/Down Switch
– This switch controls the side broom motors and side
broom lift actuator as follows:
–
Pressing the switch the first time will switch on side broom motors and switch on
the actuator to lower the side brooms The side broom on/down indicator will light
as the actuator is running Once the side brooms reach the down position, the side
broom on/down indicator will blink.
– Pressing the switch a second time will switch off the side broom on/down indicator
– Pressing the switch a third time will switch off the side broom motors and switch on the actuator to
raise the side brooms The side broom on/down indicator will light as the actuator is running Once the
side brooms reach the up position, the side broom on/down indicator will blink.
– Pressing the switch a fourth time will switch off the side broom on/down indicator
•
Solution Switch
– This switch controls the solution solenoid and solution control pump
Pressing and releasing this switch will alternately turn the solution solenoid and
solution pump on and off The solution system indicator provides the following status
information:
– Off – Solenoid and solution pump outputs are off
– Steady Blue – Solenoid and solution pump outputs are on
•
Detergent Switch
– This switch controls the detergent pumps Pressing and releasing
this switch will alternately turn the detergent pumps on and off The detergent
system indicator provides the following status information:
– Off – Detergent pump output is off
– Steady Blue – Detergent pump output is on