Scrub System, Cylindrical
78
Service Manual – Condor
™
EcoFlex
™
, BR 1100/1300 EcoFlex
™
Component Locations
The 1-1/2 HP permanent-magnet
Scrub
Motors
drive
Poly V Sheaves
and
Drive Belts
that drive the broom drive lug assemblies
coupled to the brushes
The
Scrub Deck Actuator Assembly
raises and lowers the scrub deck and
automatically adjusts the deck height
during scrubbing to maintain the correct
scrub pressure
The
Hopper Assembly
holds the dust and
debris swept up by the scrub brushes, and
can be removed for dumping and cleaning
The
Side Skirts
direct the waste water to
the squeegee and help keep the water
confined within the cleaning path. The
Side Skirt
height is adjustable, and the
Side Skirts
can be removed for cleaning or
replacement
Maintenance and Adjustments
Warning! Before performing any machine maintenance or adjustments, make sure the key
switch is off, the key is removed from the machine and the parking brake is engaged.
General Scrub System Maintenance
The scrubbing system must be serviced at regular intervals to maintain good scrubbing performance Follow
the maintenance steps listed below
Daily Maintenance
•
Dump the sweeping debris from the hopper
•
Rinse and clean any built-up debris from the hopper drain holes
Scrub
Motor (2)
Poly V Sheave/
Drive Belt (2)
(under
Belt Guard)
Scrub Deck
Actuator
Assembly
Hopper
Assembly
Side
Skirt (2)