NF HSA42011, Инструкция по эксплуатации

Страница: 75 / 86

7.6 External Control I/O
HSA42011 7-5
7.6 External Control I/O
Item Description
Control
input Control item Output on/off
Control input enable
or disable The DIP switch on the rear panel is used.
Input level Hi : +4.0 V or more
Lo : +1.0 V or less
Maximum
non-destructive input
+6 V/

5 V
Input circuit
Photocoupler LED input (150

in series)
Detection cycle 50 ms
State
output Output circuit Open collector output
Usable voltage and
current 15 V or less, 10 mA or less
State item Output on/off (short when output is on)
Overload (short when output is overload)
Update cycle 10 ms
Terminal D-sub 9-pin multiconnector (rear panel)
7.7 Output On/Off Control
Item Description
Output on/off Controllable using the switch on the front panel or external
control input (When
external control is used, the switch on the
front panel can be set to OFF only.)