NF HSA42011, Инструкция по эксплуатации

Страница: 25 / 86

2.4 Simplified Operation Check
HSA42011 2-7
 Connection
As shown in "
Figure 2-1 Standard Connection Diagram
", connect a signal generator, voltmeter,
and oscilloscope.
本製品
電圧計
オシロスコープ
10：1プローブ
WFシリーズ
1CH 30 MHｚ
信号発生器
Figure 2-1. Standard Connection Diagram
 Panel setting
Set this product and signal generator as indicated below.
Table 2-2. Panel Setting for Operation Check
This product
Item Setting
INPUT Set A to ON.
Zin
50

GAIN

50
VAR CAL
INVT OFF
BIAS OFF (Dial scale: 5.00)
Signal generator (WF1947)
Item Setting
Frequency (FREQ) 1 kHz
Waveform (FUNCTION) Sine wave
Output level (AMPTD) 0
Offset (OFFSET) 0
WF series
1CH 30MHz
Signal generato
r
This product
10:1 probe
Oscilloscope
Voltmeter