NF HSA42011, Инструкция по эксплуатации

Страница: 7 / 86

HSA42011 iii
 Avoid output voltage electric shock
The maximum output of the HSA42011 is ±75 V.
Make every effort to avoid an electric shock.
Directly touching the output or changing cable connections while output is on may cause electrical
shock.
 Ensure that water does not get into this product.
Using the product in wet condition may cause electric shock and fire. When water etc. get into the
product, immediately power it off, and contact NF Corporation or one of our representatives.
 If lightning occurs, power off and disconnect this product.
A lightning may cause an electric shock, a fire and a failure.
 Safety-related symbols
The general definitions of the safety-related symbols used on this product and in the instruction
manual are provided below.
Instruction Manual Reference Symbol
This symbol is displayed to alert the user to potential danger and refer
him/her to the instruction manual.
Electric Shock Danger Symbol
This symbol indicates locations that present a risk of electric shock under
specific conditions.
Protective Ground-Terminal Symbol
This symbol identifies a pin that must be grounded to avoid an electric
shock.
Before operating the device, be sure to safely implement grounding so
that
the ground resistance is 100 Ω or less.
Warning Symbol
This contains information to avoid risks in equipment handling that could
result in loss of life or bodily injury.
Caution Symbol
This contains information to avoid risks in equipment handling that could
result in minor or moderate injury to person or damage to property or the
equipment.
 Other symbols
This symbol indicates the “on” position of the power switch.
This symbol indicates the “off” position of the power switch.
This symbol indicates that the external conductor of the connector is connected to
the case.
This symbol indicates that the external conductor of the connector is connected to
the signal ground.
！
CAUTION
！
WARNING
！