NF HSA42011, Инструкция по эксплуатации

Страница: 6 / 86

HSA42011 ii

Safety Precautions

To ensure safe use, be sure to observe the following warnings and cautions.
NF Corporation shall not be held liable for damages that arise from a failure to observe these warnings
and cautions.
This product is a Class 1 product (with protective conductor terminal) that conforms to the JIS and IEC
insulation standards.

Be sure to observe the contents of this instruction manual.
The instruction manual contains information for the safe operation of the product.
Be sure to read the information first before using the product.
All the warnings in the instruction manual are intended for preventing risks that may lead to serious
accidents. Ensure to obey them.
 Be sure to ground the product.
This product uses a line filter and must be grounded to avoid the risk of electric shock.
To prevent electric shock, be sure to safely implement grounding so
that the ground resistance is
100 Ω or less.
This product is automatically grounded when its 3-prong power supply plug is connected to a
3-prong power outlet with a protective-ground contact.
This product does not come with a 3-prong to 2-prong conversion adapter. When using a separately
sold 3-prong to 2-prong conversion adapter, be sure to connect the grounding wire of the adapter to
the grounding terminal next to the outlet.
 Check the power supply voltage.
This product operates on the power supply voltage indicated in Grounding and Power Supply
Connection
in this instruction manual.
Prior to connecting the power supply, check that the voltage of the power supply matches the rated
power supply of the product.
 If you notice anything strange
If this product emits smoke, an unusual smell, or abnormal noise, immediately power it off and stop
using it.
If such an anomaly occurs, prevent anyone from using this product until it has been repaired, and
immediately report the problem to NF Corporation or one of our representatives.

Do not operate in an explosive atmosphere.
An explosion or other such hazard may result.

Do not remove the cover.
The product may contain high-voltage parts. Never remove the cover.
Even when the inside of this product needs to be inspected, do not touch the inside. All such
inspections are to be performed by service technicians designated by NF Corporation.
 Do not modify this product.
Never modify the product. Modification to the product may pose a new risk. We may refuse the
repair of a modified product.