Newport LDS1000 Скачать руководство пользователя страница 39

Страница: 39 / 77

EDH0170FE1010 – 09/98

LDS1000 Controller for Laser Diode Sensors

10.4.2

Commands Listed in Alphabetic Order

Command Description

Define the integration constant.

Set Manual mode.

Set Interface Mode.

Read acquisition status.

Read TRIGG input status.

Frozen display.

Active display.

Read PWOK output status.

Reset system.

Define sample period.

Stop current acquisitions.

Read current sensor parameters.

Read error.

Read error code.

Acquisitions with trigger on TRIGG input.

Immediate acquisitions.

Read sensor number and series number.

Read current measurement.

Acquisitions with synchronization on TRIGG input.

Read operational status.

Proof read acquisitions.

Read software version.

Read integration constant.

Number of measurements in memory.

Read sample period.

10.5 Description of Commands

The rest of the manual presents the commands recognized in Interface
Mode by the LDS1000 Controller. The format of one page per command is
used to make it easier to look for the correct syntax.

The commands are listed in alphabetic order.

For each command, you will find the following information:

• The modes in which the following can be carried out (if not => error D):

MNL

for manual mode.

RMT

for remote mode (or Interface Mode).

ACT

for active (acquisition in progress).

• Its syntax.

• Its parameters and the errors if they are incorrect.

• Its description.

• Its response.

• The related errors.

• An example.

• A comment if necessary.

• The commands related to that command.

Содержание LDS1000














































































Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды

Newport LDS1000, Руководство пользователя

Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды