19
EDH0170FE1010 – 09/98
LDS1000 Controller for Laser Diode Sensors
The display is in % in relation to the nominal value established at 100%.
(
F5
)
Return to main menu.
7.3.6
Maintenance Mode
=>
(
F5
) =>
(
F4
) =>
(
F2
)
Here the brut value of the 4 channels of the analog/digital converter from
the sensor is displayed. Interpreting the values depends on the sensor that
is in place. Their read-out enables the sensor’s electronic offset to be cor-
rected.
(
F5
)
Return to main menu.
7.4 Configuration Functions
Here we find the way to parameter the following elements:
• Parameter input of the sensor used.
• Parameter input of the controller.
• Interface parameter input.
7.4.1
Parameter Input of the Current Sensor or the Memorized Sensors
=>
(
F4
) =>
(
F1
)
This mode displays the number of the current sensor (currently valid) and
provides access to the following menus:
(
F1
)
Modification of current sensor parameters.
(
F2
)
Visualization of current sensor parameters.
(
F3
)
Choosing another current sensor.
(
F5
)
Return to main menu.
7.4.1.1
Selecting the Number of the Current Sensor
=>
(
F4
) =>
(
F1
) =>
(
F3
)
From this menu, it is possible to modify the number of the current sensor.
The display then takes into account the parameters associated with the
number of the current sensor.
(
F2
)
Previous number (-1).
(
F3
)
Next number (+1).
(
F4
)
Visualization of parameters of the sensor envisaged.
(
F5
)
Save the new configuration.
