Newport LDS1000 Скачать руководство пользователя страница 2

Страница: 2 / 77

EDH0170FE1010 – 09/98

LDS1000 Controller for Laser Diode Sensors

2.1 Equipment

The LDS1000 electronic controller is delivered with:

• A RS-232-C lead.

• The present user’s manual.

• The LDS-TOOLS Software.

• A connection cable (5 or 10 meters, depending on the order).

• As well as the extra accessories and options that may be ordered.

The sensor is delivered in a protection case which contains:

• The optical head.

• The control certificate.

• The present user’s manual.

2.2 Modes of Operation

2.2.1

Manual Mode

The LDS1000 Controller displays angular rotation values of the mirror on a
frontal display screen. The operator uses the display and the active but-
tons on the front panel to:

• Read the measurements.

• Modify the integration constant.

• Define the zero point.

• Program the parameters of the connected sensor.

• Modify the communication parameters (RS-232-C or IEEE-488).

• Activate the analog outputs where available.

Refer to the chapter entitled: “Off-line use”.

ATTENTION RAYONNEMENT LASER

EN CAS D'OUVERTURE

EXPOSITION DANGEREUSE

AU FAISCEAU

RAYONNEMENT LASER

NE PAS REGARDER DANS LE FAISCEAU

APPAREIL A LASER DE CLASSE 2

Puissance maxi = 0,9 mW à 670 nm

Содержание LDS1000














































































Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды

Newport LDS1000, Руководство пользователя

Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды