Newport LDS1000 Скачать руководство пользователя страница 30

Страница: 30 / 77

EDH0170FE1010 – 09/98

LDS1000 Controller for Laser Diode Sensors

9.0

TRIG Input and PWOK Output

9.1 Conventions on Logical Inputs/Outputs

The controller has a logical TRIG input available on a BNC socket on the
rear panel.

It provides a logical PWOK output that indicates if the sensor is receiving
light.

Logical Inputs/Outputs.

• The convention retained for logical inputs/outputs is the following:

– ACTIVE = 1 = High Status = The current flows = Drawn at the ground.

– PASSIVE = 0 = Low Status = The current doesn’t flow = Open wire.

• The output (PWOK) is in High status (value 1) when the sensor receives

light. With the RO command it is possible to read the status of this out-
put.

• The passage of the TRIG input from Low status to High status (upward

front) triggers the start of the synchronized acquisitions. With the RB
command it is possible to read the status of this input.

• The wiring of the logical PWOK output to the logical TRIG input allows

an acquisition cycle to be started when signal inputs into the measu-
rement range of the sensor.

• Max. frequency PWOK: 130 Hz.

• Max. frequency TRIG: 500 Hz.

• The reading is performed with a random delay from 0 to 1 msec.

The logical inputs/outputs can only be used in Interface Mode.

PWOK
Output

TRIG

Input

Содержание LDS1000














































































Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды

Newport LDS1000, Руководство пользователя

Результаты поиска

Содержание LDS1000

Отзывы:

Похожие инструкции для LDS1000

Бренды по названию

Популярные бренды