- 9 -
NEW LEADER • NL5000G5 AGCO
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
Header
Operations
PREPARE FOR EMERGENCIES
Figure 1.2 - Be prepared if a fire starts. Keep a fully charged fire extinguisher
and first aid kit in accessible place on the vehicle at all times.
Fire extinguisher must be Type ABC or Type BC.
Keep emergency numbers for doctors, ambulance service, hospital and fire
department available at all times.
Figure 1.2
General Safety Rules
INSPECT HARDWARE BEFORE USE
Figure 1.3 - Inspect all bolts, screws, fasteners, keys, chain drives, body
mounts and other attachments periodically. Immediately replace any
missing or damaged parts immediately with proper specification parts.
Inspect spinner fins, spinner frame mounting and spinner fin hardware daily.
Look for missing or loose fasteners, wear and cracks. Replace immediately if
needed. Use only new SAE grade 5 or grade 8 screws and self-locking nuts.
Tighten all bolts, nuts and screws to specified torques. Refer to “Standard
Torques” in Maintenance section of this manual.
Figure 1.3
HANDLE FLAMMABLE MATERIALS SAFELY
Figure 1.4 - Handle fuel and hydraulic oil with care. They are highly
flammable.
Always stop the engine before refueling machine or filling hydraulic
reservoir.
Never smoke while adding fuel or oil to machine. Add fluids in a safe place
away from open flame and sparks.
Do not allow overflow. Clean up spilled fuel and oil immediately.
Figure 1.4
Always have a multipurpose dry chemical fire extinguisher filled and available during machine operation and
when adding fuel. Know how to use it.
