- 121 -
NEW LEADER • NL5000G5 AGCO
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
Header
Controller Operations
HYDRAULICS
NOTE:
This program will show a visual representation of hydraulic monitoring, including system pressure,
temperature, conveyor pressure, and indicators for low fluid level and filter restriction. Individual
bins can be viewed by pressing the bin icons along the bottom of the screen.
1.
Power up Display Monitor and activate VT.
•
The Run screen will appear. Press
to continue.
•
The Tools main screen will appear. Press
to continue.
2.
View hydraulic monitoring:
•
Hydraulics - System pressure, Temperature, and status
of Fluid Level and Filter Restrictions will show system
wide.
•
Conveyor Pressure will display for Bin 1, and
cumulatively for Bins 2 - 4 as equipped.
•
Fluid Level and Filter Restriction status are shown in the
lower right hand corner. When within acceptable levels,
the boxes are outlined in green and display a
(as
shown). If fluid level is low or if filter is restricted, the
box will be outlined in red and display a
Press
to return to Tools Screen.
