- 116 -
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
NEW LEADER • NL5000G5 AGCO
Header
Controller Operations
BOUNDARY SPREADING
NOTE:
This program allows the operator to independently modify spinner speeds to change the width of
spread to either side, creating a “boundary” line to maximize spreading efficiency.
•
On the Run Screen, press
to access spinner
settings.
1.
Enter spinner offset:
•
The Spinner Settings screen will appear. To create a
Boundary, use the keypad to enter a specific Spinner
Offset. Spread pattern tests should be completed for
each product to be spread to determine best offset
settings, based on density, crush strength and size. See
“Spread Pattern” section for details. Press
to save and
return.
2.
Enable boundary spreading:
•
When running normally, Run Screen will display all swath
sections normally. To activate the Boundary, flip the
spinner switch on the switch box to the side that the
boundary is on.
•
EXAMPLE: If spreading with a boundary to the right hand
side in relation to direction of travel, flip the switch to the
right to limit the spread pattern on the right hand side.
•
When Boundary is activated, Run Screen will display with
the outer swath section darkened on the boundary side
(right hand boundary activation shown).