Interlogix NetworX NX-1700E Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 18

background image

NX1700EIG05
(Supercedes NX1700EIF04)

NX-1700E Proximity Card Reader

Installation and Startup

© 2012 UTC Fire & Security
All rights reserved. Printed in the United States of America.
NetworX



is a trademark of the UTC Fire & Security.

These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to be met during installation,
operation, and maintenance. If further information is desired or if particular problems arise that are not covered sufficiently for the purchaser’s
purpose, the matter should be referred to UTC Fire & Security, Gladewater, Texas, USA.

This document contains proprietary information of UTC Fire & Security, USA and is furnished to its customer solely to assist that customer in the
installation, testing, operations, and/or maintenance of the equipment described. This document shall not be reproduced in whole or in part nor shall
its contents be disclosed to any third party without the written approval of UTC Fire & Security.

Please refer to the current UTC Fire & Security product catalog for detailed warranty information.

Main 800-727-2339

Technical

Support

888-437-3287

Outside the US

903-845-6941

Sales & Literature

800-547-2556

Main Fax

903-845-6811

Web:

www.utcfireandsecurity.com

Symbol Legend

Warning

Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in personal
injury.

* This symbol indicates electrical warnings and cautions.

Caution

Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in damage to or
destruction of equipment or property.

** This symbol indicates general warnings and cautions.



Note

Indicates an essential or important procedure, instruction, condition, or statement.



Tip

Indicates a user tip. Provides helpful information that is not normally defined in regular use, but from an
experienced user.



Enter

Indicates a key or button should be pressed to enter data.

ORDERING INFORMATION

PART #

DESCRIPTION

PART #

DESCRIPTION

NX-1700E

Card Reader Module

NX-216E

16 Zone Expander Module

NX-8E

8 – 192 Zone Control Only

NX-320E

Smart Power Supply and Buss Extender

NX-848E-KIT

NX-8E Control, NX-148E LCD Keypad, 40VA
Transformer

NX-408E



8 Zone Wireless Expansion Module

NX-8

8 – 48 Zone Control Only

NX-416E



16 Zone Wireless Expansion Module

NX-848-KIT

NX-8 Control, NX-148E LCD Keypad, 40VA
Transformer

NX-448E



48 Zone Wireless Expansion Module

NX-6

6 – 12 Zone Control Only

NX-507E

Seven Relay Module

NX-648-KIT

NX-6 Control, NX-148E LCD Keypad, 40VA
Transformer

NX-508E

Eight Output Module

NX-148E

Alphanumeric 48 Zone LCD Keypad

NX-534E

Two-Way Listen In Module

NX-1192E

192 Zone LCD Keypad



These units are UL listed for residential use only.

1
2
3
...
»

Содержание NetworX NX-1700E



















Отзывы:

Нет отзывов

Похожие инструкции для NetworX NX-1700E

Бренд: Gallagher Страницы: 11

Бренд: Jensen Страницы: 92

Бренд: Majestic Страницы: 13

Бренд: Zonet Страницы: 2

Бренд: ZKTeco Страницы: 3

Бренд: Eonon Страницы: 16

QuickScan QBT21 Series

Бренд: Datalogic Страницы: 56

Бренд: Tar River Страницы: 34

Бренд: U-Line Страницы: 3

Бренд: S-1 Страницы: 4

Бренд: Onkyo Страницы: 53

BeSpoke Premium Audio pt296-00142

Бренд: Scion Страницы: 189

Бренд: Sound Storm Страницы: 11

Бренд: QVSR Страницы: 4

Бренд: Siemens Страницы: 4

Бренд: Siemens Страницы: 8

Bewator PR500EM

Бренд: Siemens Страницы: 10

Бренд: Siemens Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды