ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Firewall Security and Content Filtering
5-9
v1.0, July 2008
3.
Click
Apply
to save your changes and reset the fields on this screen. The new rule will be
listed on the
Outbound Services
table.
Creating a LAN WAN Inbound Services Rule
This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
allowing inbound services opens holes in your firewall. Only enable those ports that are necessary
for your network.
To create a new inbound service rule in the LAN WAN Rules tab:
1.
Click
Add
under the Inbound Services Table. The
Add LAN WAN Inbound Service
screen is
displayed.
2.
Configure the parameters based on the descriptions in
Table 5-2 on page 5-5
.
3.
Click
Apply
to save your changes and reset the fields on this screen. The new rule will be
listed on the
Inbound Services
table.
Modifying Rules
To make changes to an existing outbound or inbound service rule:
Figure 5-3
Need news creenshot
