ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
4-14
Wireless Configuration
v1.0, July 2008
SSID and WEP/WPA Settings Setup Form
802.11b/g/n Configuration
For a new wireless network, print or copy this form and fill in the configuration parameters. For an
existing wireless network, the person who set it up or is responsible for the network will be able to
provide this information. Be sure to set the Regulatory Domain correctly as the first step.
•
SSID:
The Service Set Identification (SSID) requires the identity or name of the wireless local
area network.
NETGEAR
is the default SRXN3205 SSID. However, you may customize it by
using up to 32 alphanumeric characters. Write your customized SSID on the line below.
___________________________________
Note:
The SSID in the VPN Firewall is the SSID you configure in the wireless adapter card.
All wireless nodes in the same network must be configured with the same SSID:
•
Authentication:
Circle one: Automatic, Open System, or Shared Key. (Choose Shared Key for more security.)
Note:
If you select shared key, the other devices in the network will not connect unless they
are set to Shared Key as well and have the same keys in the same positions as those in the
SRXN3205.
•
WEP Encryption Keys.
Circle one: 64, 128, or 152 bits. (Enter all four 802.11a/n keys for the Key Size chosen.)
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
•
WPA-PSK (Preshared Key)
Record the WPA-PSK key. Key: ___________________________________
•
WPA RADIUS Settings.
For WPA, record the following settings for the primary and
secondary RADIUS servers:
Server Name/IP Address: Primary _________________ (Secondary __________________ ?)
RADIUS Port: ___________________________________
Shared Key: ___________________________________
