ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
4-8
Wireless Configuration
v1.0, July 2008
Completing Wireless Setup (No Security)
The purpose of setting your wireless settings in stages, without the security settings, is to eliminate
any possible errors in setting up your wireless settings before adding the more complicated
security settings. This method will greatly aid you in discovering where the errors in your security
settings are by removing doubts about your wireless settings.
Configuring 802.11b/g/n Wireless Settings
To configure the 802.11 b/g/n wireless settings of your VPN Firewall:
1.
Select
Network Configuration
>
Wireless Settings
from main/submenu.
The Wireless Settings screen of your VPN Firewall will display, as shown in
Figure 4-6
below.
2.
Configure the Wireless LAN settings based on the following field descriptions:
•
Mode
. Select the desired wireless operating mode. The default is 11ng. The options are:
Figure 4-6 need new screenshot
