Netberg Demos R130 M2, Руководство пользователя

Страница: 36 / 263

Installing hardware
23
2.3. Hard drives
Do not operate the system without all hard drive trays inserted into the chassis. All
hard drive bays must be occupied by either a hard drive or an empty hard drive tray.
Hard drives may be removed while the system is operational but should be immediate-
ly replaced by another hard drive or an empty hard drive tray.
Repairs should be perfomed by a certified service technician. Damage to the system
or components due to unauthorized servicing is not covered by the warranty agree-
ment.
2.3.1. Removing a 2.5” Hard Drive
This procedure applies only for 2.5" model.
Figure 2.3. Opening the 2.5” Hard Drive Tray Handle
1. Press the tray handle button.
Figure 2.4. Removing a 2.5” Hard Drive Tray
2. Pull the HDD tray handle completely open.
Make sure the tray handle is in the fully open position.
3. Grasp the tray handle and pull the tray out of the system.
4. Remove the four (4) screws securing the hard drive to the HDD tray.