Netberg Demos R130 M2, Руководство пользователя

Страница: 16 / 263

Netberg Demos R130 M2 server
3
1.2. Acronyms
A/D Analog to Digital
ACPI Advanced Configuration and Power Interface
ASF Alerting Standard Forum
Asserted Active-high (positive true) signals are asserted when in the high electrical
state (near power potential). Active-low (negative true) signals are asserted
when in the low electrical state (near ground potential).
BIOS Basic Input/Output System
BIST Built-In Self Test
BMC At the heart of the IPMI architecture is a microcontroller called the Baseboard
management controller (BMC)
Bridge Circuitry connecting one computer bus to another, allowing an agent on one
to access the other
BSP Bootstrap processor
Byte 8-bit quantity
CLI Command Line Interface
CMOS In terms of this specification, this describes the PC-AT compatible region of
battery-backed 128 bytes of memory, which normally resides on the base-
board
CPU Central Processing Unit
Deasserted A signal is deasserted when in the inactive state. Active-low signal names
have “_L” appended to the end of the signal mnemonic. Active-high signal
names have no “_L” suffix. To reduce confusion when referring to active-high
and active-low signals, the terms one/zero, high/low, and true/false are not
used when describing signal states.
DTC Data Transfer Controller
EEPROM Electrically Erasable Programmable Read-Only Memory
EMP Emergency Management Port
FRU Field Replaceable Unit
GB 1024 MB.
GPIO General Purpose Input/Out
HSC Hot-Swap Controller
Hz Hertz (1 cycle/second)
I2C Inter-Integrated Circuit bus
IANA Internet Assigned Numbers Authority
IBF Input buffer
ICH I/O Controller Hub
ICMB Intelligent Chassis Management Bus