NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 29 / 174

Information needed to connect and configure 10/25-GbE ports on SG6000-CN controller
The four 10/25-GbE ports on the SG6000-CN controller connect to the StorageGRID Grid Network and the
optional Client Network.
Information needed Your value
Link speed Choose one:
• Auto (default)
• 10 GbE
• 25 GbE
Port bond mode Choose one:
• Fixed (default)
• Aggregate
Switch port for port 1 (Client Network for Fixed mode)
Switch port for port 2 (Grid Network for Fixed mode)
Switch port for port 3 (Client Network for Fixed mode)
Switch port for port 4 (Grid Network for Fixed mode)
Information needed to connect SG6000-CN controller to Grid Network
The Grid Network for StorageGRID is a required network, used for all internal StorageGRID traffic. The
appliance connects to the Grid Network using the 10/25-GbE ports on the SG6000-CN controller.
Information needed Your value
Network bond mode Choose one:
• Active-Backup (default)
• LACP (802.3ad)
VLAN tagging enabled Choose one:
• No (default)
• Yes
VLAN tag(if VLAN tagging is enabled) Enter a value between 0 and 4095:
DHCP-assigned IP address for the Grid Network, if
available after power on • IPv4 address (CIDR):
• Gateway:
27