NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 153 / 174

Remove SG6000-CN controller cover
Remove the controller cover to access internal components for maintenance.
What you’ll need
Remove the controller from the cabinet or rack to access the top cover.
Remove SG6000-CN controller from cabinet or rack
Steps
1. Make sure that the SG6000-CN controller cover latch is not locked. If necessary, turn the blue plastic latch
lock one-quarter turn in the unlock direction, as shown on the latch lock.
2. Rotate the latch up and back toward the rear of the SG6000-CN controller chassis until it stops; then,
carefully lift the cover from the chassis and set it aside.
Wrap the strap end of an ESD wristband around your wrist and secure the clip end to a
metal ground to prevent static discharge when working inside the SG6000-CN controller.
Related information
Remove Fibre Channel HBA
Reinstall SG6000-CN controller cover
Reinstall the controller cover when internal hardware maintenance is complete.
What you’ll need
You have completed all maintenance procedures inside the controller.
Steps
1. With the cover latch open, hold the cover above the chassis and align the hole in the top cover latch with
the pin in the chassis. When the cover is aligned, lower it onto the chassis.
151