NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 27 / 174

Information needed Your value for controller A Your value for controller B
DHCP-assigned IP address for
management port 1, if available
after power on
Note: If the network you will
connect to the storage controller
includes a DHCP server, the
network administrator can use the
MAC address to determine the IP
address that was assigned by the
DHCP server.
Static IP address you plan to use
for the appliance on the
management network For IPv4:
• IPv4 address:
• Subnet mask:
• Gateway:
For IPv6:
• IPv6 address:
• Routable IP address:
• storage controller router IP
address:
For IPv4:
• IPv4 address:
• Subnet mask:
• Gateway:
For IPv6:
• IPv6 address:
• Routable IP address:
• storage controller router IP
address:
IP address format Choose one:
• IPv4
• IPv6
Choose one:
• IPv4
• IPv6
Speed and duplex mode
Note: You must make sure the
Ethernet switch for the SANtricity
System Manager management
network is set to autonegotiate.
Must be:
• Autonegotiate (default)
Must be:
• Autonegotiate (default)
Information needed to connect SG6000-CN controller to Admin Network
The Admin Network for StorageGRID is an optional network, used for system administration and maintenance.
The appliance connects to the Admin Network using the following 1-GbE management ports on the SG6000-
CN controller.
25