NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 162 / 174

For the best network performance, all nodes should be configured with similar MTU values on
their Grid Network interfaces. The
Grid Network MTU mismatch alert is triggered if there is a
significant difference in MTU settings for the Grid Network on individual nodes. The MTU values
do not have to be the same for all network types.
To change the MTU setting without rebooting the appliance node, use the Change IP tool .
If the Client or Admin Network was not configured in the StorageGRID Appliance Installer during the initial
installation,
change the MTU setting using maintenance mode .
Change the MTU setting using the Change IP tool
What you’ll need
You have the Passwords.txt file to use the Change IP tool.
Steps
Access the Change IP tool and update the MTU settings as described in Change node network configuration .
Change the MTU setting using maintenance mode
Change the MTU setting using maintenance mode if you are unable to access these settings using the Change
IP tool.
What you’ll need
The appliance has been placed maintenance mode .
Steps
1. From the StorageGRID Appliance Installer, select Configure Networking > IP Configuration .
2. Make the desired changes to the MTU settings for the Grid Network, Admin Network, and Client Network.
160