NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 156 / 174

controller BMC IP address listed the StorageGRID Appliance section.
You can use this IP address to turn on the compute controller identify LED, to help you locate the appliance
in the data center.
Turn the controller identify LED on and off
Related information
Remove Fibre Channel HBA
Remove Fibre Channel HBA
You might need to replace the Fibre Channel host bus adapter (HBA) in the SG6000-CN
controller if it is not functioning optimally or if it has failed.
What you’ll need
• You have the correct replacement Fibre Channel HBA.
• You have determined which SG6000-CN controller contains the Fibre Channel HBA to replace.
Verify Fibre Channel HBA to replace
• You have physically located the SG6000-CN controller where you are replacing the Fibre Channel HBA in
the data center.
Locate controller in data center
• You have removed the controller cover.
Remove SG6000-CN controller cover
About this task
To prevent service interruptions, confirm that all other Storage Nodes are connected to the grid before starting
the Fibre Channel HBA replacement or replace the adapter during a scheduled maintenance window when
periods of service disruption are normally expected. See the information about determining node connection
states in the instructions for managing objects with information lifecycle management.
If you have ever used an ILM rule that creates only one copy of an object, you must replace the
Fibre Channel HBA during a scheduled maintenance window. Otherwise, you might temporarily
lose access to those objects during this procedure.
See information about managing objects with information lifecycle management.
Steps
1. Wrap the strap end of the ESD wristband around your wrist, and secure the clip end to a metal ground to
prevent static discharge.
2. Locate the riser assembly at the rear of the controller that contains the Fibre Channel HBA.
154