NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 69 / 174

Accessing SANtricity System Manager from the Grid Manager or from the Appliance Installer is
generally meant only for monitoring your hardware and configuring E-Series AutoSupport. Many
features and operations within SANtricity System Manager such as upgrading firmware do not
apply to monitoring your StorageGRID appliance. To avoid issues, always follow the hardware
installation and maintenance instructions for your appliance.
About this task
There are three ways to access SANtricity System Manager, depending upon what stage of the installation and
configuration process you are in:
• If the appliance has not yet been deployed as a node in your StorageGRID system, you should use the
Advanced tab in the StorageGRID Appliance Installer.
Once the node is deployed, you can no longer use the StorageGRID Appliance Installer to
access SANtricity System Manager.
• If the appliance has been deployed as a node in your StorageGRID system, use the SANtricity System
Manager tab on the Nodes page in Grid Manager.
• If you cannot use the StorageGRID Appliance Installer or Grid Manager, you can access SANtricity System
Manager directly using a web browser connected to the management port.
This procedure includes steps for your initial access to SANtricity System Manager. If you have already set up
SANtricity System Manager, go to the
configure hardware alerts step .
Using either the Grid Manager or the StorageGRID Appliance Installer enables you to access
SANtricity System Manager without having to configure or connect the management port of the
appliance.
You use SANtricity System Manager to monitor the following:
• Performance data such as storage array level performance, I/O latency, CPU utilization, and throughput
• Hardware component status
• Support functions including viewing diagnostic data
You can use SANtricity System Manager to configure the following settings:
• Email alerts, SNMP alerts, or syslog alerts for the components in the storage controller shelf
• E-Series AutoSupport settings for the components in the storage controller shelf.
For additional details on E-Series AutoSupport, see the NetApp E-Series Systems Documentation Site .
• Drive Security keys, which are needed to unlock secured drives (this step is required if the Drive Security
feature is enabled)
• Administrator password for accessing SANtricity System Manager
Steps
1. Do one of the following:
◦
Use the StorageGRID Appliance Installer and select Advanced > SANtricity System Manager
◦ Use the Grid Manager and select NODES >
appliance Storage Node
> SANtricity System
67