NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 173 / 174

The KMS encryption key and all data are deleted from the node, and the appliance reboots. This can take
up to 20 minutes.
5. Open a browser, and enter one of the IP addresses for the appliance’s compute controller.
https://
Controller_IP
:8443
Controller_IP
is the IP address of the compute controller (not the storage controller) on any of the
three StorageGRID networks.
The StorageGRID Appliance Installer Home page appears.
6. Select Configure Hardware > Node Encryption .
7. Verify that node encryption is disabled and that the key and certificate information in Key Management
Server Details and the Clear KMS Key and Delete Data control are removed from the window.
Node encryption cannot be reenabled on the appliance until it is reinstalled in a grid.
After you finish
After the appliance reboots and you have verified that KMS has been cleared and that the appliance is in a
pre-install state, you can physically remove the appliance from your StorageGRID system. See the
instructions
for preparing the appliance for reinstallation .
Related information
Administer StorageGRID
171