NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 139 / 174

Possible hardware damage — The metal flange at the front of the battery must be
completely inserted into the slot on the controller (as shown in the first figure). If the
battery is not installed correctly (as shown in the second figure), the metal flange might
contact the controller board, causing damage.
▪
Correct — The battery’s metal flange is completely inserted in the slot on the controller:
▪
Incorrect — The battery’s metal flange is not inserted into the slot on the controller:
j. Replace the controller cover.
6. Install the replacement controller into the appliance.
a. Turn the controller over, so that the removable cover faces down.
b. With the cam handle in the open position, slide the controller all the way into the appliance.
c. Move the cam handle to the left to lock the controller in place.
d. Replace the cables and SFPs.
e. If the original controller used DHCP for the IP address, locate the MAC address on the label on the
back of the replacement controller. Ask your network administrator to associate the DNS/network and
IP address for the controller you removed with the MAC address for the replacement controller.
If the original controller did not use DHCP for the IP address, the new controller will
adopt the IP address of the controller you removed.
137